The CH6 tone module is fitted into a compact plastic box. (only 83x54x30mm)
It can be used as a stand alone unit on any brand and model amplifier or mixer. A 5 way plug-in terminal block gives access to the module’s 4 tones. All you need is a clean contact closure to activate the tones.
The audio output is unbalanced line level with a screwdriver adjustable pot inside on the board (preset to maximum – about 1V RMS). The output impedance is less than 100 ohms with the volume at maximum level. The CH6 is powered by a 12Vac 500mA (supplied) plugpack.
The CH6 is pre-progammed by default with these sounds:
- Trigger 1; Acending 4 Note Chime
- Trigger 2; Bell Tone Medium
- Trigger 3; Alert Alarm (AS2220)
- Trigger 4; Evacuation Alarm (AS2220)
Check here to preview the sounds (up to 4) you can choose instead of the default ones as well as the brochure with instructions.